Research and development of semi automatic forming machine for saddle valve plate

发布时间：2017-05-26

　　Core technology:

　　1, through the use of flat belt and forming roller between the rotating pressure, the valve plate into an arc, to ensure that the molding of the valve size stability

　　2, the use of flat belt conveyor principle, the operator simply put the valve on the flat belt can be, the valve will automatically send to the molding roller, to achieve semi-automatic quantity and automatic discharge.

　　3, through the use of mechanical forming way, completely change the original manual molding mode, processing speed, quality, can batch production, production costs greatly reduced

　　Innovation point:

　　1. By using the rotating pressure between the flat belt and the forming roller, the valve plate is processed to make the forming force of the valve piece even and solve the problem that the height of the manual molding is unstable.

　　2. In the process of processing, only the valve plate is placed on the forming belt, and the belt will deliver the valve sheet to the forming roller, and the formed valve sheet will fall on the discharging device on its own. The operation is simple, the production efficiency is high and the quality is stable.

　　3, according to the requirements of different products and different heights, only the different molding rollers can be changed, thus greatly shortening the processing cycle and saving the processing cost.